| - 1 |
Start Windows and log on as Administrators or Power Users. When using a driver downloaded from the Internet: After downloading the driver from the Internet, extract the file(s) to a folder of your choice. From the [Start] menu, point to [Settings] or [Control Panel], then click [Printers] or [Printers and Faxes] or [View Devices and Printers]. In the Printer folder double click [Add Printer] (it may be in [Printer Tasks]), and click "Next >".
|
| - 2 |
Follow the Wizard guidance and select a printer connection method (My Computer or Network Printer Server / Local or Network Printer), then click "Next >" to continue.
|
| - 3 |
The following explanation applies when the user has selected a [Local] connection method.
A) To install the downloaded driver, click [Have Disk] then [Browse] to locate the folder where you had extracted the downloaded driver, from this folder select Disk 1, then click "OK". B) Insert the CD-ROM into the CD ROM Drive, [Have Disk] button in "Manufacturers:" / "Printers:" window, then enter the path (e.g. D:\DRIVERS\PCL{5,6}\XP_VISTA\(language)\DISK1\) of the designated Drive then click "OK". (You can also navigate to the Drive by clicking the [Browse] button).
|
| - 4 |
Select the printer to use. After selecting, click "Next >".
|
| - 5 |
Specify printer name. And if you want to use installed printer as the default printer, check "Yes". After specifying, click "Next >".
|
| - 6 |
If you want to share installed printer with other network users, indicate and set sharing. After above, click "Next >".
|
| - 7 |
Print test page to confirm that the printer is set up properly. Check on "Yes(recommended)" , then click "Finish", and finally , the installation is completed.
|
| - 1 |
Start Windows and select the printer icon in Printers folder (or "Printers and Faxes", "View Devices and Printers"), then click "File"-"Delete" and delete the printer.
|
| - 2 |
Install new version of the PCL printer driver with the same step as
"(1) Installing PCL printer driver at the first time" |
| - 1 | From the [Start] menu, point to [Settings] or [Control Panel], then click [Printers] or [Printers and Faxes] or [View Devices and Printers]. |
| - 2 | Select the printer you want to uninstall. |
| - 3 | Press [Delete] key. |
| - 4 | Select "Driver" Tab in Server Property from File Menu in Printer Folder. |
| - 5 | Select the driver you want to uninstall. |
| - 6 | Press [Delete] key. |
| * | With PCL printer driver, the drivers of different versions can't be used together. |
| * | If "Print Settings" screen doesn't look normal after installation, delete the driver with the procedure of above (3) and reinstall the driver. |
| * | Do not extract CD-ROM before the installation is finished. Or else, system error might occur. |
| * | Bi-directional network communication may requires SmartDeviceMonitor for Client. It is up to the printer you use. |
| * | SmartDeviceMonitor for Client cannot be run on Windows x64. Therefore, bi-directional network communication is only available with the 32-bit driver(It is up to the printer you use). |
| * | Remote Install is not available. |
| * | During the driver installation, Windows may suggest to keep the newer module already installed in Windows. Please select "Yes" to use the newer module. |
| * | The CD-ROM installer causes the Spooler service to temporarily stop. We do not recommend using the CD-ROM installer on a member server of a Microsoft cluster environment because other services that rely on the Spooler might also stop causing a failover to occur. Instead, the Add Printer Wizard should be used. If this is done, the Spooler service will not stop. |
| * | To avoid problems in general, make sure that there is plenty of free disk space. |
| * | With some applications (e.g. CorelDRAW, Visio), complicated images may take a long time to print when the "Graphic Mode" is "Vector". For faster printing, choose "Raster"(Graphics Mode) and/or "Print as graphics"(TrueType Mode) on the "Print Quality" tab. |
| * | If the printer driver language differs from that of the Operating System, characters may not be printed properly or the characters on the printer driver may not be displayed properly. |
| * | If Graphics Mode is "Raster" then parts of the job might be output as blank unprinted pages. If this occurs, try changing the resolution setting. |
| * |
When the spooler is paused, please do not send the print job.
|
| * |
If a Separator Page is selected, some documents may not print as expected.
|
| * |
Please do not change the "Driver" setting on the "General" or "Advanced" tab.
|
| * |
[Copies] in [Setup] Tab: When "Copies" is selected on the driver's "Setup" tab, the value may not be reflected in the application print dialog box. Be sure to set the number of copies only in the driver, not in the application. |
| * |
[Staple] in [Setup] Tab: Documents may not be stapled at the slant angle, even when you select "Top Left Slant" or "Top Right Slant". In such a case, the document will be stapled parallel to an edge of the paper. |
| * |
[Custom Paper Size] in [Paper] Tab: The measurement unit in the Custom Paper Size dialog is reset to "cm" when the driver dialog is reopened, even if the custom paper size was previously specified in "inch". The paper size specification is retained regardless of the unit. |
| * |
[On first page only] in [Watermark] Tab, and [Booklet/Duplex] in [Setup] Tab: The watermark is not printed on the first page when both "On first page only" and "Booklet" are selected. |
| * |
[Print Quality] Tab: If the "Graphics Mode" is set to "Raster" or if the "TrueType Mode" is set to "Download as bit image", the watermark may not print correctly. Change the "Graphics Mode" to "Vector". |
| * |
[Booklet/Duplex] in [Setup] Tab: Printing a large document in booklet, duplex or reverse order printing produce a large temporary file. If you encounter an error when printing a large document in booklet, try again after increasing the free area in system installed drive (e.g. C:). |
| * |
[Post Processing] in [Advanced Options] Tab: If the "Post Processing" is set to "OFF", the watermark as "Transparency" may not print correctly. In order to avoid this problem, please change the "Post Processing" to "ON". |
| * |
[Edge to Edge Print] in [Print Quality] Tab, and [Non Reduction Booklet] in [Setup] Tab: When both "Edge to Edge Print" and "Non Reduction Booklet" functions are selected, some documents may not print as expected. |
| * |
[Covers] in [Paper] Tab: Use of a different Paper Source for the cover setting might result in a paper mismatch error. This occurs if the cover is of a different paper size than the rest of the document. This only happens if the cover is not blank and if the source tray for the rest of the document is not "Auto Tray Select". As a workaround, change the print settings so that any one of the above conditions are not met. Note: "cover" = Front Cover, Back Cover or Chaptering Pages |
| * | When graphics images or text printed as graphics images are not printed as they appear on your computer screen, change the "Graphics Mode" on the "Print Quality" tab. |
| * | Selecting the Spool Type as EMF may cause some applications not to print well in "Vector" mode. If this happens, return the Spool Type setting to RAW. |
| * | With Adobe Type Manager(ATM), some characters may not print correctly. To avoid this problem, change the "Graphic Mode" to "Raster" or print the document with PCL 6 or PostScript driver. |
| * | With some applications, some characters may not print correctly. To solve this problem, change the "TrueType Mode" and/or the "Use Printer Fonts" on the "Print Quality" tab. |
| * | Documents that contain fonts not installed on your computer will not print correctly. Make sure your document only contains fonts installed on your computer. |
| * | The watermark as "Outline only" may not print if the watermark message contains Chinese characters. To avoid this problem, use the PCL 6 driver. |
| * | Additional lines may appear when the bold HANYI fonts larger than 36 points are printed. |
| * | The HANYI fonts can not be printed in 300 dpi. To avoid this problem, print it in 600 dpi. |
| * | Some Chinese fonts such as HUA WEN CAI and HUA WEN XING KAI may not print appropriately. To avoid this problem, please set "Graphics Mode" to "Raster" and "TrueType Mode" to "Print as graphics" in the "Print Quality" tab. |
| * | To print watermark text in Chinese, choose a Chinese font. |
| * |
When printing complicated documents to a printer connected with a parallel interface, the printer time-out may cause the document to print incorrectly. If this happens, set the Spool Setting to "Start printing after last page is spooled" and/or extend the IO timeout at the printer operation panel(max. 300 seconds).
|
| * |
When the printer is connected with a SMB port, "Update Now" in the Accessories tab doesn't work. Please manually configure the accessories.
|
| * |
Black and White documents might be printed in full color (CMYK). To ensure that the job prints using pure Black (K), please change the color mode to "Black and White" or "Monochrome". |
| * | When selecting "Color" from "Color/ Black and White" setting in the "Setup" Tab, black and white document may be printed as a color job, depending on application or data. If you want to print a document in black and white, select "Black and White" in "Color/ Black and White" setting. |
| * |
Windows Vista does not support the help format used in previous versions of Windows. Please download the legacy help application WinHlp32.exe from Microsoft.
|
| * |
When resolution setting of Display is smaller than 800x600dpi, "Information Help" window dialog may be oversized on the display. In this case, to close the window, click "X" botton on the right corner of the window dialog.
|
| * |
Additional Page Count in Duplex Printing An extra page is added to the end of odd-paged duplex jobs. The added page might be incremented in the printer's counter. |
| * |
Point&Print drivers do not inherit Watermark settings Drivers installed on a client using Point&Print do not inherit Watermark settings from the server. |
| * |
Reverse Order is not supported with the Duplex, Front Cover, Back Cover, Chapter Pages, Slip Sheet functions.
|
| * |
Microsoft * Microsoft Office XP * - If you are using Office XP, be sure to apply Service Pack 1 or later to avoid printing problems. * MS-Project * - When using with MS-Project, the stripe pattern interval may not print as it appears on your computer screen. If this happens, change the "Graphics Mode". - To print multiple copies from MS-Project, set the number of copies setting in the application print dialog box to 1, and then specify the number of copies using "Copies" setting on the driver's "Setup" tab. * PowerPoint * - PowerPoint may print some graphics objects with the same color although they are in different colors on the computer screen. To solve this problem, change the object's color. * WordPad - When you change the printer properties from WordPad, changes will not be reflected in the print job immediately following the change. |
| * |
Corel * CorelDRAW * - You can not enter the number of copies greater than 9 in the printer driver dialog opened from CorelDRAW 8, due to a problem in CorelDRAW 8. To print more than 9 copies, set the number of copies in the CorelDRAW 8's print dialog. - The printer driver dialog opened from CorelDRAW 8 may show unreadable characters, due to a problem in CorelDRAW 8. |
| * |
Adobe * Acrobat * -In case Acrobat Reader prints unexpected characters or graphics, change the "Graphics Mode" in "Print Quality" tab to "Raster". - If printed using Adobe Acrobat/Acrobat Reader, black and white PDF documents compressed by MMR are printed in full color with some image distortion/deterioration. This can be prevented by disabling the application's "Print As Image" function. - If printed using Adobe Acrobat/Acrobat Reader, PDF documents are printed with hatched pattern corrupted. This can be prevented by enabling the applicaton's "Print As Image" function. * Frame Maker * - With Adobe Frame Maker, please use *.FM document to print when "Duplex/Booklet" or "Staple" function is selected. * Page Maker * - PageMaker may not print graphics if a document contains large amount of graphics. To print such documents, change the "Memory Usage" settings to "Font Priority" on the printer operation panel. - PageMaker shifts the image by about one inch with some paper sizes. To solve this problem, print using a different paper size. |
@
All brand names and product names mentioned in this document are trademarks or registered trademarks of their respective companies.